*Features*:

*Efficient Dog Fencing System*:The transmitter, receiver, and boundary wire form an effective fencing system together to deter our dogs from the designated area, which greatly ensures our pets’ safety. The boundary wire creates an effective signal field when the transmitter is working. If your dog tends to walk out of the boundary, the transmitter will emit a harmless radio signal. Once the receiver detects the signal, it will automatically switch to beep or shock mode to urge your dog to return to the boundary.

*Effective Training Modes*:The receiver works automatically once you start up the system. It will send beeps (4 levels) and shocks (4 levels) as your dog tries to cross the boundary wire. The closer your dog goes, the more intense the shock will be, effectively training him back to the play area you set.

*Adjustable Control Distance & Collar*:The transmitter comes with a 1.2-acre signal field range and 100 adjustable levels. The remote control distance can be increased by 0.5 m (1.6 ft) at each of the 10 levels. The wire break warning can tell you in time if the wire is broken. Made of TPU, the collar strap is 28.3 in long and features 34 holes, allowing it to be adjusted to fit your dog’s neck properly. Fits dogs of all sizes.

*Multiple Dogs Support*:One transmitter can pair with multiple receivers. With the 300mAh built-in rechargeable battery, our receiver stays on standby for around 2 days after a 2-4 hour charge. If the red indicator flashes quickly, it means the receiver needs to be charged. In addition, made of durable ABS material and featuring an IPX7 waterproof level, our receiver greatly extends its service life and allows your dog to play in wet grass or rainy weather. Note: Our package only contains 1 receiver and 1 collar strap.

*Easy To Test & Use*:Easy to test. First, pull out at least 4m/13ft of boundary wire and strip off the insulating layer at both ends. Second, form a closed loop with the wire and insert both ends into the transmitter's terminals. Third, install 2 metal probes on the bottom of the receiver, and put the test bulb on. Fourth, turn on the transmitter after inserting the power cord. Fifth, hold the receiver close to the boundary wire and observe. Easy to use. Comes with 20 training flags to help you conduct proper training and ensure the dog understands the boundaries and responds appropriately to the warning signals.

Friendly Reminder:
1. It’s important to adjust the collar to properly fit the dog’s neck.
2. For long-haired dogs, please trim some hair on your dog’s neck to ensure good contact of the metal probes.
3. It’s recommended to wear the collar for less than 8 hours per day. If possible, reposition the collar on the pet's neck every 1 to 2 hours.
4. Please keep this receiver away from children to avoid their playing causing unintended electric shock.
5. Beep and shock modes can’t adjust the intensity level.
6. Proper training is essential to ensure that the dog understands the boundaries and responds appropriately to the warning signals.
7. If your dog is aggressive, you’d better consult with an animal professional before using our electronic dog fence system.
8. Only suitable for dogs.

*Specifications*:

Product Type: Electric Dog Fencing System
Material: ABS
Collar Strap Material: TPU
Transmitter Voltage: 100-240V/60Hz
Receiver Input: DC12V/1A
Inbuilt Battery(Receiver): 300mAh Rechargeable Battery
Receiver Runtime: Around 2 Days
Receiver Charging Time: Around 2-4Hours
Receiver Modes: Beep(4 Levels); Electric Shock(4 Levels)
Waterproof Level(Receiver): IPX7
Signal Field Range: ≤5000 Square Meters/53189Square FT/1.2Acre
Adjustable Levels(Transmitter): 100 Levels
Remote Control Distance: Increases 0.5M/1.6FT Every 10 Levels
Boundary Wire Length: 200m/656FT
Suggested Wire Bury Depth: More Than 1in Underground
Per Flag Length:19.5cm/7.7in
Charging Cable Length(With Adapter): 102cm/3.3ft
Collar Strap Length: 72cm/28.3in
Transmitter Size: 14.3x8x3cm/5.63x3.15x1.18in
Transmitter Weight: 93g/0.26lbs
Receiver Size: 7.3x4.1x3cm/2.9x1.6x1.18in
Receiver Weight: 56g/0.12 lbs
With 1 Collar Package Size: 30.4x20x5.2cm/12x7.9x2in

With 1 Collar Package Weight: 1.09kg/2.4 lbs

*With 1 Collar Package List*:

1x Transmitter
1x Receiver
1x Collar Strap
1x Test Bulb
1x Adapter with 2 Split Cords
1 Coil x Boundary Wire
20 x Training Flags
2 x Long Metal Probes
2 x Short Metal Probes
2 x Screws
2 x Plastic Anchors
1x User Manual

*With 2 Collar Package Lists*:

1x Transmitter
2x Receivers
2x Collar Straps
2x Test Bulbs
1x Adapter with 2 Split Cords
1 Coil x Boundary Wire
20 x Training Flags
4 x Long Metal Probes
4 x Short Metal Probes
2 x Screws
2 x Plastic Anchors
1x User Manual